Forum OpenACS Q&A: Re: OpenACS 5.5.0 install Debian 6 64bits - When trying to install OpenACS I get "Not Found"

Jim, I agree. The aolserver is working. Now I need to install openacs.

I paste here my config.tcl file:

pabloacs@debian:~$ vi /var/lib/aolserver/pabloacs/etc/config.tcl
ns_log notice "nsd.tcl: starting to read config file..."

######################################################################
#
# Instance-specific settings
# These default settings will only work in limited circumstances
# Two servers with default settings cannot run on the same host
#
######################################################################

#---------------------------------------------------------------------
# change to 80 and 443 for production use
set httpport 8000
set httpsport 8443
# If setting port below 1024 with AOLServer 4, read comments in file:
# /var/lib/aolserver/service0/packages/etc/daemontools/run

# The hostname and address should be set to actual values.
# setting the address to 0.0.0.0 means aolserver listens on all interfaces
set hostname 0.0.0.0
set address 0.0.0.0

# Note: If port is privileged (usually < 1024), OpenACS must be
# started by root, and, in AOLserver 4, the run script have a
# '-b address' flag which matches the address according to settings (above)

set server "pabloacs"
set servername "pabloacs - New OpenACS Installation - Development"

set serverroot "/var/www/${server}"

#---------------------------------------------------------------------
# which database do you want? postgres or oracle
set database postgres

set db_name $server

if { $database eq "oracle" } {
set db_password "mysitepassword"
} else {
set db_host localhost
set db_port ""
"/var/lib/aolserver/pabloacs/etc/config.tcl" 675 lines, 28859 characters written
pabloacs@debian:~$
pabloacs@debian:~$
pabloacs@debian:~$ /usr/local/aolserver/bin/nsd-postgres -t /var/lib/aolserver/pabloacs/etc/config.tcl
pabloacs@debian:~$ [13/Dec/2012:15:17:46][1607.1950369536][-main-] Notice: nsd.tcl: starting to read config file...
[13/Dec/2012:15:17:46][1607.1950369536][-main-] Notice: nsd.tcl: using threadsafe tcl: 1
[13/Dec/2012:15:17:46][1607.1950369536][-main-] Notice: nsd.tcl: finished reading config file.

pabloacs@debian:~$
pabloacs@debian:~$ cat /var/lib/aolserver/pabloacs/etc/config.tcl
ns_log notice "nsd.tcl: starting to read config file..."

# The hostname and address should be set to actual values.
# setting the address to 0.0.0.0 means aolserver listens on all interfaces
set hostname 0.0.0.0
set address 0.0.0.0

set server "pabloacs"
set servername "pabloacs - New OpenACS Installation - Development"

set serverroot "/var/www/${server}"

#---------------------------------------------------------------------
# which database do you want? postgres or oracle
set database postgres

set db_name $server

if { $database eq "oracle" } {
set db_password "mysitepassword"
} else {
set db_host localhost
set db_port ""
set db_user $server
}

#---------------------------------------------------------------------
# if debug is false, all debugging will be turned off
set debug yes

set homedir /usr/lib/aolserver4
set bindir ${homedir}/bin

set max_file_upload_mb 20
set max_file_upload_min 5

######################################################################
#
# End of instance-specific settings
#
# Nothing below this point need be changed in a default install.
#
######################################################################

#---------------------------------------------------------------------
#
# AOLserver's directories. Autoconfigurable.
#
#---------------------------------------------------------------------
# Where are your pages going to live ?
set pageroot ${serverroot}/www
set directoryfile index.tcl,index.adp,index.html,index.htm

#---------------------------------------------------------------------
# Global server parameters
#---------------------------------------------------------------------
ns_section ns/parameters
ns_param serverlog ${serverroot}/log/error.log
ns_param home $homedir
# maxkeepalive is ignored in aolserver4.x
ns_param maxkeepalive 0
ns_param logroll on
ns_param maxbackup 5
ns_param debug $debug
# ns_param mailhost localhost

# setting to Unicode by default
# see http://dqd.com/~mayoff/encoding-doc.html
ns_param HackContentType 1
ns_param DefaultCharset utf-8
ns_param HttpOpenCharset utf-8
ns_param OutputCharset utf-8
ns_param URLCharset utf-8

#---------------------------------------------------------------------
# Thread library (nsthread) parameters
#---------------------------------------------------------------------
ns_section ns/threads
ns_param mutexmeter true ;# measure lock contention
# The per-thread stack size must be a multiple of 8k for AOLServer to run under MacOS X
ns_param stacksize [expr {128 * 8192}]

#
# MIME types.
#
ns_section ns/mimetypes
# Note: AOLserver already has an exhaustive list of MIME types:
# see: /usr/local/src/aolserver-4.{version}/aolserver/nsd/mimetypes.c
# but in case something is missing you can add it here.
ns_param Default */*
ns_param NoExtension */*
ns_param .pcd image/x-photo-cd
ns_param .prc application/x-pilot
ns_param .xls application/vnd.ms-excel
ns_param .doc application/vnd.ms-word

#---------------------------------------------------------------------
#
# Server-level configuration
#
# There is only one server in AOLserver, but this is helpful when multiple
# servers share the same configuration file. This file assumes that only
# one server is in use so it is set at the top in the "server" Tcl variable
# Other host-specific values are set up above as Tcl variables, too.
#
#---------------------------------------------------------------------
ns_section ns/servers
ns_param $server $servername

#
# Server parameters
#
ns_section ns/server/${server}
ns_param directoryfile $directoryfile
ns_param pageroot $pageroot
ns_param maxconnections 100 ;# Max connections to put on queue
ns_param maxdropped 0
ns_param maxthreads 10
ns_param minthreads 5
ns_param threadtimeout 120 ;# Idle threads die at this rate
ns_param globalstats false ;# Enable built-in statistics
ns_param urlstats false ;# Enable URL statistics
ns_param maxurlstats 1000 ;# Max number of URL's to do stats on
# ns_param directoryadp $pageroot/dirlist.adp ;# Choose one or the other
# ns_param directoryproc _ns_dirlist ;# ...but not both!
# ns_param directorylisting fancy ;# Can be simple or fancy

#
# Special HTTP pages
#
ns_param NotFoundResponse "/global/file-not-found.html"
ns_param ServerBusyResponse "/global/busy.html"
ns_param ServerInternalErrorResponse "/global/error.html"

#---------------------------------------------------------------------
#
# ADP (AOLserver Dynamic Page) configuration
#
#---------------------------------------------------------------------
ns_section ns/server/${server}/adp
ns_param map /*.adp ;# Extensions to parse as ADP's
# ns_param map "/*.html" ;# Any extension can be mapped
ns_param enableexpire false ;# Set "Expires: now" on all ADP's
ns_param enabledebug $debug ;# Allow Tclpro debugging with "?debug"
ns_param defaultparser fancy

ns_section ns/server/${server}/adp/parsers
ns_param fancy ".adp"

ns_section ns/server/${server}/redirects
ns_param 404 "global/file-not-found.html"
ns_param 403 "global/forbidden.html"

#
# Tcl Configuration
#
ns_section ns/server/${server}/tcl
ns_param library ${serverroot}/tcl
ns_param autoclose on
ns_param debug $debug

#---------------------------------------------------------------------
#
# Rollout email support
#
# These procs help manage differing email behavior on
# dev/staging/production.
#
#---------------------------------------------------------------------
ns_section ns/server/${server}/acs/acs-rollout-support

# EmailDeliveryMode can be:
# default: Email messages are sent in the usual manner.
# log: Email messages are written to the server's error log.
# redirect: Email messages are redirected to the addresses specified
# by the EmailRedirectTo parameter. If this list is absent
# or empty, email messages are written to the server's error log.
# filter: Email messages are sent to in the usual manner if the
# recipient appears in the EmailAllow parameter, otherwise they
# are logged.

# ns_param EmailDeliveryMode redirect
# ns_param EmailRedirectTo mailto:somenerd@yourdomain.test, mailto:othernerd@yourdomain.test
# ns_param EmailAllow mailto:somenerd@yourdomain.test,mailto:othernerd@yourdomain.test

#---------------------------------------------------------------------
#
# WebDAV Support (optional, requires oacs-dav package to be installed
#
#---------------------------------------------------------------------
ns_section ns/server/${server}/tdav
ns_param propdir ${serverroot}/data/dav/properties
ns_param lockdir ${serverroot}/data/dav/locks
ns_param defaultlocktimeout "300"

ns_section ns/server/${server}/tdav/shares
ns_param share1 "OpenACS"
# ns_param share2 "Share 2 description"

ns_section ns/server/${server}/tdav/share/share1
ns_param uri "/dav/*"
# all WebDAV options
ns_param options "OPTIONS COPY GET PUT MOVE DELETE HEAD MKCOL POST PROPFIND PROPPATCH LOCK UNLOCK"

#ns_section ns/server/${server}/tdav/share/share2
# ns_param uri "/share2/path/*"
# read-only WebDAV options
# ns_param options "OPTIONS COPY GET HEAD MKCOL POST PROPFIND PROPPATCH"

#---------------------------------------------------------------------
#
# Socket driver module (HTTP) -- nssock
#
#---------------------------------------------------------------------
ns_section ns/server/${server}/module/nssock
ns_param timeout 120
ns_param address $address
ns_param hostname $hostname
ns_param port $httpport
# setting maxinput higher than practical may leave the server vulnerable to resource DoS attacks
# see http://www.panoptic.com/wiki/aolserver/166
ns_param maxinput [expr {$max_file_upload_mb * 1024 * 1024}] ;# Maximum File Size for uploads in bytes
ns_param maxpost [expr {$max_file_upload_mb * 1024 * 1024}] ;# Maximum File Size for uploads in bytes
ns_param recvwait [expr {$max_file_upload_min * 60}] ;# Maximum request time in minutes

# maxsock will limit the number of simultanously returned pages,
# regardless of what maxthreads is saying
ns_param maxsock 100 ;# 100 = default

# On Windows you need to set this parameter to define the number of
# connections as well (it seems).
ns_param backlog 5 ;# if < 1 == 5

# Optional params with defaults:
ns_param bufsize 16000
ns_param rcvbuf 0
ns_param sndbuf 0
ns_param socktimeout 30 ;# if < 1 == 30
ns_param sendwait 30 ;# if < 1 == socktimeout
ns_param recvwait 30 ;# if < 1 == socktimeout
ns_param closewait 2 ;# if < 0 == 2
ns_param keepwait 30 ;# if < 0 == 30
ns_param readtimeoutlogging false
ns_param serverrejectlogging false
ns_param sockerrorlogging false
ns_param sockshuterrorlogging false

#---------------------------------------------------------------------
#
# Access log -- nslog
#
#---------------------------------------------------------------------
ns_section ns/server/${server}/module/nslog
ns_param debug false
ns_param dev false
ns_param enablehostnamelookup false
ns_param file ${serverroot}/log/${server}.log
ns_param logcombined true
ns_param extendedheaders COOKIE
# ns_param logrefer false
# ns_param loguseragent false
ns_param logreqtime true
ns_param maxbackup 1000
ns_param rollday *
ns_param rollfmt %Y-%m-%d-%H:%M
ns_param rollhour 0
ns_param rollonsignal true
ns_param rolllog true

#---------------------------------------------------------------------
#
# nsjava - aolserver module that embeds a java virtual machine. Needed to
# support webmail. See http://nsjava.sourceforge.net for further
# details. This may need to be updated for OpenACS4 webmail
#
#---------------------------------------------------------------------
ns_section ns/server/${server}/module/nsjava
ns_param enablejava off ;# Set to on to enable nsjava.
ns_param verbosejvm off ;# Same as command line -debug.
ns_param loglevel Notice
ns_param destroyjvm off ;# Destroy jvm on shutdown.
ns_param disablejitcompiler off
ns_param classpath /usr/local/jdk/jdk118_v1/lib/classes.zip:${bindir}/nsjava.jar:${pageroot}/webmail/java/activation.jar:${pageroot}/webmail/java/mail.jar:${pageroot}/webmail/java

#---------------------------------------------------------------------
#
# CGI interface -- nscgi, if you have legacy stuff. Tcl or ADP files inside
# AOLserver are vastly superior to CGIs. I haven't tested these params but they
# should be right.
#
#---------------------------------------------------------------------
#ns_section "ns/server/${server}/module/nscgi"
# ns_param map "GET /cgi-bin ${serverroot}/cgi-bin"
# ns_param map "POST /cgi-bin ${serverroot}/cgi-bin"
# ns_param Interps CGIinterps

#ns_section "ns/interps/CGIinterps"
# ns_param .pl "/usr/bin/perl"

#---------------------------------------------------------------------
#
# PAM authentication
#
#---------------------------------------------------------------------
ns_section ns/server/${server}/module/nspam
ns_param PamDomain "pam_domain"

#---------------------------------------------------------------------
#
# OpenSSL for Aolserver 3.3 and 4
#
#---------------------------------------------------------------------
if { [ns_info version] < 4} {

#---------------------------------------------------------------------
# OpenSSL for Aolserver 3.3
#---------------------------------------------------------------------

ns_section "ns/server/${server}/module/nsopenssl"

ns_param ModuleDir ${serverroot}/etc/certs

# NSD-driven connections:
ns_param ServerPort $httpsport
ns_param ServerHostname $hostname
ns_param ServerAddress $address
ns_param ServerCertFile certfile.pem
ns_param ServerKeyFile keyfile.pem
ns_param ServerProtocols "SSLv2, SSLv3, TLSv1"
ns_param ServerCipherSuite "ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP"
ns_param ServerSessionCache true
ns_param ServerSessionCacheID 1
ns_param ServerSessionCacheSize 512
ns_param ServerSessionCacheTimeout 300
ns_param ServerPeerVerify false
ns_param ServerPeerVerifyDepth 3
ns_param ServerCADir ca
ns_param ServerCAFile ca.pem
ns_param ServerTrace false

# For listening and accepting SSL connections via Tcl/C API:
ns_param SockServerCertFile certfile.pem
ns_param SockServerKeyFile keyfile.pem
ns_param SockServerProtocols "SSLv2, SSLv3, TLSv1"
ns_param SockServerCipherSuite "ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP"
ns_param SockServerSessionCache true
ns_param SockServerSessionCacheID 2
ns_param SockServerSessionCacheSize 512
ns_param SockServerSessionCacheTimeout 300
ns_param SockServerPeerVerify false
ns_param SockServerPeerVerifyDepth 3
ns_param SockServerCADir internal_ca
ns_param SockServerCAFile internal_ca.pem
ns_param SockServerTrace false

# Outgoing SSL connections
ns_param SockClientCertFile certfile.pem
ns_param SockClientKeyFile keyfile.pem
ns_param SockClientProtocols "SSLv2, SSLv3, TLSv1"
ns_param SockClientCipherSuite "ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP"
ns_param SockClientSessionCache false
ns_param SockClientSessionCacheID 3
ns_param SockClientSessionCacheSize 512
ns_param SockClientSessionCacheTimeout 300
ns_param SockClientPeerVerify false
ns_param SockServerPeerVerifyDepth 3
ns_param SockClientCADir ca
ns_param SockClientCAFile ca.pem
ns_param SockClientTrace false

# OpenSSL library support:
# ns_param RandomFile /some/file
ns_param SeedBytes 1024

} else {

#---------------------------------------------------------------------
# OpenSSL for Aolserver 4
#---------------------------------------------------------------------
ns_section "ns/server/${server}/module/nsopenssl"

# Note this portion of the configuration is not perfect, and you
# will get errors in the your error.log. However, it does
# work. Fixes welcome.

# this is used by acs-tcl/tcl/security-procs.tcl to get the
# https port.
ns_param ServerPort $httpsport
# setting maxinput higher than practical may leave the server vulnerable to resource DoS attacks
# see http://www.panoptic.com/wiki/aolserver/166
# must set maxinput for nsopenssl as well as nssock
ns_param maxinput [expr {$max_file_upload_mb * 1024 * 1024}] ;# Maximum File Size for uploads in bytes

# We explicitly tell the server which SSL contexts to use as defaults when an
# SSL context is not specified for a particular client or server SSL
# connection. Driver connections do not use defaults; they must be explicitly
# specificied in the driver section. The Tcl API will use the defaults as there
# is currently no provision to specify which SSL context to use for a
# particular connection via an ns_openssl Tcl command.
ns_section "ns/server/${server}/module/nsopenssl/sslcontexts"
ns_param users "SSL context used for regular user access"
# ns_param admins "SSL context used for administrator access"
ns_param client "SSL context used for outgoing script socket connections"

ns_section "ns/server/${server}/module/nsopenssl/defaults"
ns_param server users
ns_param client client

ns_section "ns/server/${server}/module/nsopenssl/sslcontext/users"
ns_param Role server
ns_param ModuleDir ${serverroot}/etc/certs
ns_param CertFile certfile.pem
ns_param KeyFile keyfile.pem
# ns_param CADir ca-client/dir
# ns_param CAFile ca-client/ca-client.crt
# for Protocols "ALL" = "SSLv2, SSLv3, TLSv1"
ns_param Protocols "SSLv3, TLSv1"
ns_param CipherSuite "ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP"
ns_param PeerVerify false
ns_param PeerVerifyDepth 3
ns_param Trace false

# following from bartt's nsd4.tcl, might help stablize openssl connections?
# http://www.mail-archive.com/aolserver@listserv.aol.com/msg07092.html
ns_param SessionCache true
ns_param SessionCacheID 1
ns_param SessionCacheSize 512
ns_param SessionCacheTimeout 300

# ns_section "ns/server/${server}/module/nsopenssl/sslcontext/admins"
# ns_param Role server
# ns_param ModuleDir /path/to/dir
# ns_param CertFile server/server.crt
# ns_param KeyFile server/server.key
# ns_param CADir ca-client/dir
# ns_param CAFile ca-client/ca-client.crt
# for Protocols "ALL" = "SSLv2, SSLv3, TLSv1"
# ns_param Protocols "All"
# ns_param CipherSuite "ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP"
# ns_param PeerVerify false
# ns_param PeerVerifyDepth 3
# ns_param Trace false

ns_section "ns/server/${server}/module/nsopenssl/sslcontext/client"
ns_param Role client
ns_param ModuleDir ${serverroot}/etc/certs
ns_param CertFile certfile.pem
ns_param KeyFile keyfile.pem
# ns_param CADir ${serverroot}/etc/certs
# ns_param CAFile certfile.pem
# for Protocols "ALL" = "SSLv2, SSLv3, TLSv1"
ns_param Protocols "SSLv2, SSLv3, TLSv1"
ns_param CipherSuite "ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP"
ns_param PeerVerify false
ns_param PeerVerifyDepth 3
ns_param Trace false

# following from bartt's nsd4.tcl, might help stablize openssl connections?
# http://www.mail-archive.com/aolserver@listserv.aol.com/msg07092.html
ns_param SessionCache true
ns_param SessionCacheID 1
ns_param SessionCacheSize 512
ns_param SessionCacheTimeout 300

# SSL drivers. Each driver defines a port to listen on and an explitictly named
# SSL context to associate with it. Note that you can now have multiple driver
# connections within a single virtual server, which can be tied to different
# SSL contexts.
ns_section "ns/server/${server}/module/nsopenssl/ssldrivers"
ns_param users "Driver for regular user access"
# ns_param admins "Driver for administrator access"

ns_section "ns/server/${server}/module/nsopenssl/ssldriver/users"
ns_param sslcontext users
# ns_param port $httpsport_users
ns_param port $httpsport
ns_param hostname $hostname
ns_param address $address
# following added per
# http://www.mail-archive.com/aolserver@listserv.aol.com/msg07365.html
# Maximum File Size for uploads:
ns_param maxinput [expr {$max_file_upload_mb * 1024 * 1024}] ;# in bytes
# Maximum request time
ns_param recvwait [expr {$max_file_upload_min * 60}] ;# in minutes

# ns_section "ns/server/${server}/module/nsopenssl/ssldriver/admins"
# ns_param sslcontext admins
# ns_param port $httpsport_admins
# ns_param port $httpsport
# ns_param hostname $hostname
# ns_param address $address
}

#---------------------------------------------------------------------
#
# Database drivers
# The database driver is specified here.
# Make sure you have the driver compiled and put it in {aolserverdir}/bin
#
#---------------------------------------------------------------------
ns_section "ns/db/drivers"
if { $database eq "oracle" } {
ns_param ora8 ${bindir}/ora8.so
} else {
ns_param postgres ${bindir}/nspostgres.so ;# Load PostgreSQL driver
}

if { $database eq "oracle" } {
ns_section "ns/db/driver/ora8"
ns_param maxStringLogLength -1
ns_param LobBufferSize 32768
}

# Database Pools: This is how AOLserver ``talks'' to the RDBMS. You need
# three for OpenACS: main, log, subquery. Make sure to replace ``yourdb''
# and ``yourpassword'' with the actual values for your db name and the
# password for it, if needed.
#
# AOLserver can have different pools connecting to different databases
# and even different different database servers. See
# https://openacs.org/doc/openacs-5-1/tutorial-second-database.html

ns_section ns/db/pools
ns_param pool1 "Pool 1"
ns_param pool2 "Pool 2"
ns_param pool3 "Pool 3"

ns_section ns/db/pool/pool1
ns_param maxidle 0
ns_param maxopen 0
ns_param connections 15
ns_param verbose $debug
ns_param extendedtableinfo true
ns_param logsqlerrors $debug
if { $database eq "oracle" } {
ns_param driver ora8
ns_param datasource {}
ns_param user $db_name
ns_param password $db_password
} else {
ns_param driver postgres
ns_param datasource ${db_host}:${db_port}:${db_name}
ns_param user $db_user
ns_param password ""
}

ns_section ns/db/pool/pool2
ns_param maxidle 0
ns_param maxopen 0
ns_param connections 5
ns_param verbose $debug
ns_param extendedtableinfo true
ns_param logsqlerrors $debug
if { $database eq "oracle" } {
ns_param driver ora8
ns_param datasource {}
ns_param user $db_name
ns_param password $db_password
} else {
ns_param driver postgres
ns_param datasource ${db_host}:${db_port}:${db_name}
ns_param user $db_user
ns_param password ""
}

ns_section ns/db/pool/pool3
ns_param maxidle 0
ns_param maxopen 0
ns_param connections 5
ns_param verbose $debug
ns_param extendedtableinfo true
ns_param logsqlerrors $debug
if { $database eq "oracle" } {
ns_param driver ora8
ns_param datasource {}
ns_param user $db_name
ns_param password $db_password
} else {
ns_param driver postgres
ns_param datasource ${db_host}:${db_port}:${db_name}
ns_param user $db_user
ns_param password ""
}

ns_section ns/server/${server}/db
ns_param pools pool1,pool2,pool3
ns_param defaultpool pool1

#---------------------------------------------------------------------
# which modules should be loaded? Missing modules break the server, so
# don't uncomment modules unless they have been installed.
ns_section ns/server/${server}/modules
ns_param nssock ${bindir}/nssock.so
ns_param nslog ${bindir}/nslog.so
ns_param nssha1 ${bindir}/nssha1.so
# since aolserver version 4.5.1 built-in ns_cache, so we dont
# need to load the nscache module.
if {[ns_info version] < 4.5 || [ns_info patchlevel] eq "4.5.0"} {
ns_param nscache ${bindir}/nscache.so
}
# openacs versions earlier than 5.x requires nsxml
# ns_param nsxml ${bindir}/nsxml.so

#---------------------------------------------------------------------
# nsopenssl will fail unless the cert files are present as specified
# later in this file, so it's disabled by default
# ns_param nsopenssl ${bindir}/nsopenssl.so

# authorize-gateway package requires dqd_utils
# ns_param dqd_utils dqd_utils[expr {int($tcl_version)}].so

# Full Text Search
# ns_param nsfts ${bindir}/nsfts.so

# PAM authentication
# ns_param nspam ${bindir}/nspam.so

# LDAP authentication
# ns_param nsldap ${bindir}/nsldap.so

# These modules aren't used in standard OpenACS installs
# ns_param nsperm ${bindir}/nsperm.so
# ns_param nscgi ${bindir}/nscgi.so
# ns_param nsjava ${bindir}/libnsjava.so
# ns_param nsrewrite ${bindir}/nsrewrite.so

if { [ns_info version] >= 4 } {
# Required for AOLserver 4.x
ns_param nsdb ${bindir}/nsdb.so
} else {
# Required for AOLserver 3.x
ns_param libtdom ${bindir}/libtdom.so
}

# nsthread library which should become standard in 5.3
ns_param libthread [lindex [glob ${homedir}/lib/thread*/libthread*[info sharedlibextension]] 0]

if {[ns_info version] >= 4.5} {
ns_limits set default -maxupload [ns_config ns/server/${server}/module/nssock maxinput]
}

ns_log notice "nsd.tcl: using threadsafe tcl: [info exists tcl_platform(threaded)]"
ns_log notice "nsd.tcl: finished reading config file."
if {[ns_info version] >= 4.5} {
ns_limits set default -maxupload [ns_config ns/server/${server}/module/nssock maxinput]
}
pabloacs@debian:~$