Forum OpenACS Q&A: Re: Help with openacs installing
thanks for applying the patches, I was not sure which makro is the preferred one as both where offered in ns.h.
Until now Aolserver was sufficient, and as there was no real reason, I have not tried NaviServer yet. A while a go I did notice that the nsmemcache module was developed for NaviServer first, and now i stumbled over some recent posts on the Aolserver mailing list, which said that the naviserver-dev mailing list is much more active than the aolserver mailing lists. So I think I will try NaviServer.
If I recall right there was a Licensing issue with Aolserver which was the initial reason for the NaviServer Project, is this it, or is there more? I checked the NaviServer Pages on sourceforge.net and wiki.tcl.tk and their doesn't seem to be a great difference between Aolserver and NaviServer.
The preferred macros start with NS_* (but the one you used work as well, but these are for compatibility).
One reason for the split was a question in "philosophy", since the aolserver fraction was very conservative on changes and the NaviServer needed changes for integration with their products (one case was that aolserver was webserver only, while naviserver went towards multi-protocol server; see , thread "Support for non-HTTP protocols")
There is no exhaustive list of differences between aolserver and NaviServer, so i think the best place the check is the changelog summary. The biggest hurdle for a quick check is probably the different config file, but you will find in the NaviServer sources several sample config files, including one modeled for OpenACS.
Most of the differences between aolserver and NaviServer are about extending functionality. Alex Hisen pointed out not long ago in the aolserver mailing list three (actually deprecated) features of aolserver, that might require replacements in legacy code, when one switches from aolserver to NaviServer:
1) Support for optional $conn argument in ns_return*, etc commands
3) ns_set -persist
The first one is about using ignored arguments, the second and third can be handled via nsv, for (2) Stephen Deasey wrote additionally an extra module.
Recent versions of OpenACS is free of these features since several years. OpenACS.org runs on NaviServer since about one year, the performance gain was significant (see ).
All the best
thank you for all the information, I did take a look at the config.tcl Description for NaviServer at http://wiki.tcl.tk/22673 and there does not seem to be that many differences in the configuration. The Aolserver features not available in NAviServer 1)-3) wont affect my own code, and as it seems to be that development efforts go more and more into NaviServer, i think i will give it a try.
I have another patch for nsopenssl concerning the Error
tclcmds.c:338:31: error: 'Tcl_Interp' has no member named 'result'
which occurs when compiled for tcl8.6, where the interp object fields cant be accessed directly anymore,
I would like to tell about my exp getting 8.6tcl to work with some of the aolserver modules...
Before 8.6, the tcl result was available as a string, with some funcs to set and append to that string.
At 8.6, you actually have a choice, you can rebuild it so it works as before (so result is exposed) or you can alter code which accesses the result, as the patch suggests.
What I found out was, if you want numeric result values, you can have tcl set them as ints or maybe longs (or other object types). This is what I preferred to do when I was trying to get 8.6 going.
You want to be very cautious with sprintf, as this func doesn't limit the writing based on length. So, you either want to use things that append to the string result object, or you want to set as cast to a different type, for example int. 8.6 provides calls for doing either.
Almost every time I've seen uses of sprintf (in -anything-), I knew there was the typical "buffer overrun" possibility, and in the cases where I could, I was able to replace each with calls to snprintf (or to use a different alternative that was also safe).
As an aside, many years ago, when looking at aolserver source for my first time, I happened to look at the call Ns_DStringPrintf, which then used sprintf. I wrote an equivalent using snprintf, and aolserver devs eventually took a whole printf func from some stdio lib source, and adapted it so that it "printf"ed to a DString in a safe manner. To Gustaf, if you hadn't done so already, would you be willing to look at it and at naviserv source to see if it's been incorporated already?
If you're going to use sprintf, get the length of the buffer and use snprintf instead, as not doing so could result in a crash if sprintf overwrites a dynamically allocated buffer.
This may sound like hyperbole, but it's my very stong belief that sprintf is never safe, and should always be replaced with snprintf.
I may still have the sources of other aolserver or naviserv (don't remember which at this moment) modules, where I had to rewrite the pieces that set or get the tcl result.
On request, I'll put something together in the hope it will assist.
The supported ssl driver for NaviServer is nsssl  part of the 43 NaviServer modules . Nsssl is up to date in terms of the security features of OpenSSL (e.g. forward secrecy). When using this driver, one gets an A+ rating from SSL labs by following the configuration instructions in the README file. Furthermore, the driver nsssl provides the "ns_ssl" command for https client requests, compatible with "ns_http", which use the same c-level infrastructure.
The compilation problem you faced with nsopenssl are due to the fact, that this driver was not updated for Tcl 8.6. Your fix is partly correct, but setting the interp result has to go through the appropriate tcl-api to set the result (e.g. Tcl_SetResult). I am not eager for fixing this, since we don't use the driver at all.
Actually, we are using on all production environments still Tcl 8.5, also OpenACS recommends still Tcl 8.5. There are no known issues with Tcl 8.6, just a thorough testing is missing.
all the best
I think the tcl8.6 API (http://www.tcl.tk/man/tcl8.6/TclLib/SetResult.htm). should be used to manipulate the interp result, too. Even so I used the solution from nspostgres where a reference to the interp's result string is requested, using the API, and assigned to a local variable, which is then passed to sprintf instead of passing interp->result directly. I think the way it is currently done, partly defeats the purpose of the API, because the interp objects internal state is manipulated from outside code. I did use it because it was a 'known to work' solution, which i needed, and was not certain that there isn't a good reason why it is done this way.
The use of sprintf is original code from nsopenssl, I just changed the variable which is passed to it. Besides the manipulation of interp->result (assuming they will be replaced by calls to the API), sprintf is used twice more to create the channelName, and once to write to buf.
thank you for the information, I was just needing nsopenssl for a Development Server and thought the fix might be help full for others, even so it's not a perfect solution, it's a working one. On live systems i use nginx in front of Aolserver, besides other reasons to handle ssl client requests.
In the case of writing integers to the tcl result, you don't have to concern yourself with either sprintf or snprintf, you can use other tcl api calls to set the result to the integer directly, and this is what is recommended.
I'll help you in any way I can to make sure these bugs no longer plague us. Would you like me to show the calls that involve writing integers to the tcl result?
you are right, snprintf is the preferred way, i did use that too when i was writing a simple custom gzip_http_post method. With original code I just meant, it's know to work code,and not new code introduced by the patch, which may lead to problems in case the patch is applied.
As well i was uncertain if fixing this is going to be appreciated at all, because development efforts seem to go more into NaviServer rather then Aolserver. Hearing that there is still interest i can make the changes, and would appreciated some guidance.
First Question is there a preferred way to set the interp result, as there are 2 ways Tcl_SetResult/Tcl_SetObjResult and Tcl_AppendResult. Currently the result is set to a single string, to replace it by the new API I would go with.
sprintf(interp->result, "%d", nread);
is replaced by
interp->result = "could not register callback";
is replaced by
Tcl_SetResult(interp, "could not register callback", TCL_STATIC);
sprintf(interp->result, "%s", Tcl_GetChannelName(chan));
is replaced by
Tcl_SetResult(interp, Tcl_GetChannelName(chan), TCL_VOLATILE);
I updated the patch to use the new tcl API, at one point I had to use the Function Tcl_ObjPrintf, which is available in tcl8.5/.6 only, As the function is not available in tcl8.4 I wrapped it in a #if which checks the tcl version, and in case a the tcl version is 8.4 or lower snprintf is used instead.
+#if (TCL_MAJOR_VERSION >= 8) && (TCL_MINOR_VERSION > 4 )
+ Tcl_SetObjResult(interp, Tcl_ObjPrintf("%lu", peercert == NULL ? 0 : X509_get_version(peercert) + 1));
+ snprintf(&buf, sizeof(buf), "%lu", peercert == NULL ? 0 : X509_get_version(peercert) + 1);
+ Tcl_SetResult(interp, buf, TCL_VOLATILE);